Surely many are familiar with the line of devices from Wotofo, the name of which is Recurve.

There is a squonk mod, a tine one coil RDA, which was really good.

Today we talk about the third product in this series, which aims at something more universal than "just for squonking".

 Wotofo Recurve Dual RDA

RDA is sealed in a stylish green-black-striped box with a transparent plastic window-cover, through which you can see the device.

On the front side is the name, there is a signature "Designed By WoToFo & Mike Vapes", and the corresponding logos.

On the back again logos and badges.

On the sides of the box again logos, barcode, sticker with color and field to check for originality.

Kit contains:

  • Recurve Dual RDA;
  • Instruction booklets
  • A couple of coils of nichrome wire with a resistance of about 0.26 Ohm;
  • Cotton;
  • Additional 810 drip tip;
  • Screwdrivers and orings, screws and squonk-pin;
  • Tool to trim the coils.


The tool is assembled from several plates. The thickest plate has a thickness of 4 mm, the remaining six - 1 mm (10 mm thickness of the entire structure).

To use the tool is quite simple — fold the plate, insert the coils and cut the legs with the cutters. The manufacturer recommends installing a coil with a 7 mm length

Wotofo Recurve Dual RDA 

Let's start, as always, with the list of characteristics:

It is made of stainless steel, the diameter of the RDA is 24 mm,the height is 27 mm. Weight - 40 grams

The material is super glossy, perfectly collects fingerprints, and the only logo is a design element (the word "Recurve"), accumulates any dirt, dust, skin particles, which, although the eye and is not particularly visible, but the camera catches them and clean it all extremely problematic.

The device is available in 6 colors:

Black, Blue, Gold, Gunmetal, Rainbow, SS. We got the first color.


Design features!


The RDA consists of three parts — a drip tip, airflow cap and build deck.

Let's start from the top down.


The 810 drip tip is made of acrylic. Each color of the atomizer is equipped with a certain drip tip color, not random.

Additional drip type is also 810, but made of plastic and much higher. By the way, something similar was equipped with a single-coil Recurve Rda.


The steel dome has a conical treatment, the blowing holes are adjustable by turning the cap left-right, closing vertically 2, 4 or 6 holes on each side.

Scrolling is prevented by stoppers located in the inner side of the cap, and he is held at the base with two very tight orings.

I note that absolutely all 810 drip types from my collection sit perfectly, do not hang out, do not fall out. Beautiful look with a diameter of up to 18 mm.


In addition to the instruments, the coils and cotton in the trade is the original conversation Cap is made of ultem / transparent or gray matte plastic.

now Consider the base, starting with the bottom.


Here the logo of "Mike Vapes", company "Wotofo", name "Recurve Dual", well and obligatory markings is engraved.

The connector 510, the default preset normal pin, and there's another squonk pin in the kit.


The deck is drainless, designed for the installation of two coils, although no one forbids to put one. Each airflow hole is approximately 2.5 by 2.5 mm in size.

Clamping cross screws are recessed from the side in special niches, the diameter of the holes for the spiral legs is about 3 mm.

Depth is small, holds about 1 ml of liquid.

The quality of manufacturing the base as a whole is not bad, but the engraving on the side slightly scratched for a month of use, although it is in fact not visible.


Installation of the coils is very simple — cut the legs with the tool, install, secure, remove the short circuit, put cotton, cut off the excess and ready!

I set the coils starting from the manufacturer's recommended length of the legs in 7 mm, and the position relative to the airflow from the author of the drip (Mike Vapes).

But I came to the conclusion that it is best to cut the legs somewhere in the 7.5-8 mm, and install the coils closer to the blowing holes, not the center.

The results!


RDA turned out to be absolutely standard, nothing new or innovative in itself.

We essentially innovation and not promised — the manufacturer only took as a basis the single-player version, and made an upgrade to two.

The transfer of taste is good, at 7/10, the puff is pleasant, quiet, and the consistency of clouds is more than satisfied me.

By the way, the price for the kit is excellent — use promo code "RDUAL" and you can buy it for only $19!


  • A rich set;
  • Decent build and painting quality;
  • Convenient and easy installation;
  • Хорошая вкусопередача;
  • Nice price;


  • Boring and ordinary design;
  • Excessive gloss, easily collects fingerprints.


And you were Vladsmesh, Poor Vaper community, and helped with the review Xaron88, for which he had special thanks!