The Tarot Mini kit is a new kit from Vaporesso which is a typical kit from Tarot family which a similar design. It comes with a Tarot mod and a Veco Tank. It equips with the OMNI chipset in 6 modes which would meet all vapers’ need for vaping.
What’s In The Box:
- One Tarot Mini 80W TC Mod
- One Veco EUC Sub-Ohm Tank
- 0.4 ohm Clapton Traditional EUC Coil
- 0.5 ohm 316L Ceramic EUC Coil
- Spare Glass Tank Section
- Spare O-Rings
- One Micro USB Cable
- User Manuals
The Tarot Mini mod is a single battery mod which is made of zinc and aliumumn alloy.It is hard and smooth in hand. The Size of the mod is just fine when in hand. The front of the mod is the logo of vaporsso on the bottom and Tarot on the top. The back is the battery door.
Putting off it, you will get the USB charge port there. I quite not understand why they put the port in it as we have to pull off the battery to recharge the battery. Even the design help keep the port clean, it is inconvenient for charging. The battery cover and the sled is held in place by 2 magnets that attach to two recessed magnets. It is very solid.
The display screen located on the side with fire button above it and "+" and "-" button below it. It is a 0.91 inch OLED screen which is bright. You can read the data on the screen. The info about voltage, resistance, temperature, wattage, and mode all displayed so that you have a detail view when vaping. The display supports 180 degrees rotating by pressing +- button with which you can get an easier reading when vaping.
With the Omni chipset, 6 modes are available. They Smart VW, CCW, TCR, VT, CCT, and bypass mode. With the smart VW mode, when you change the Tank, it would read your coil and choose the suitable mode automatically such as when you use A1 Coil, it would change from TC Mode to VW mode.
For new vaper who do not know where to start your vaping, the Tarot Mini would be a nice choice. It comes with 6 modes which help you know more about vaping.