Related Products
Details
- SKU:GVP000100BK
- Product Type: Accessory
- Date Listed: 12/14/2015
Specifications
| Dimension | 93.6mm*75.4mm*24.7mm |
|---|---|
| Weight | 230g |
| Color | Black |
| Thread type | 510 elastic poles |
| Resistance range | 0.01ohm-9.9ohm |
| Lowest resistance rate | 0.1ohm |
| Battery type | 18650 3.7V(not included) |
| Package Contents | 1 x GeekVape Digital 521 Tab Coil Master(no battery included) |
- Details:
- 1. Breaker protection
- 2. Dry burn your DIY coil
- 3. High temperature protection
- 4. Low voltage protection
- 5. Low resistance protection
- 6. Reverse battery protection
- 7. Short circuit protection
- 8. Test atomizer coil resistance
- Short description:
- Geek Vape 521 Tab Digital Multifunction Coil Master is powered by 3.7v 18650 battery and designed to increase the degree of safety and avoid building a dangerous coil for the mod you are using.
Additional Information
| Option Title | No |
|---|
-
TOP DEVICE review by M***********r on 1/10/16TOP DEVICE With the Digital 521 Tab Coil Master the Geek Vape guys landet the next big pitch. A must-have for every DIY-vaper... The Tab arrived in a stable cardboard box. The needed 18650 battery s not included. The fabrication is very worthy and the surfaces are shiny and polished. In the center is a 510 connector with a lightly running thread and a spring-loaded connction pin. Below of the 510 connector is a three-digit-display to show the resistance and if necessary trouble-codes. On the right is a 3-position-switch to change the different working modes. On the left side is a fire button. To insert the battery, you have to remove the bottom plate that is fixed with two magnetic pins. The battery pins are spring-loaded and keep the 18650 very tight in the battery-chamber. The Tab is a perfect device for wicking your rebuildable atomizers. It gives you a solid stand and two rubber stripes on the bottom avoid that the divece slides over the table. After mounting the coils on the attys deck you can turn the switch to position ohm-meter to controll the resistance, or switch to position fire, to fire and to adjust the coil for the first time. The only thing that miss is a usb-connector to charge the battery in the device... but normally you work with it at home, so you have enough fresh batteries to replace... ABLOSUTE RECOMMENDATION FOR DIYers
-
Stoit brat!!! review by D**************o on 1/8/16
A very interesting device. Facilitates winding and burning. Hamster again requires. If you provide a test, write an honest review and publish on belvaping.com and facebook.com
Products Questions:
There is no product questions yet.
Please login in to your accoun to place a question
Recommended Prodcuts
Customer Service
Sign up for our newsletter
