When I first saw an announcement of the launch of this RDTA, I am directly encouraged to visit the manufacturer's page to know more about it. After seeing some of its characteristics there, such as Single Coil, but with good airflow, drainage of the deposit by cables, possibility of using it in BF, I am directly encouraged to try it because I thought it would fit very well with my vaping style ... I saw it interesting and a little different from everything else. Today I bring you my opinion about my experience with it, let's go to check it !!!

TECHNICAL DATA

Manufacturer: VANDY VAPE
Name: MATO RDTA
Designed by: NEBELFEE & VANDY VAPE
Atomizer type: RDTA (with possibility of BF)
Deck Type: Without posts, Flat Deck
Resistance Configuration: Single Coil
Length without Drip: 45 mm
Length With Drip: 54.90 mm
Diameter: 24 mm
Tank capacity / s: 5 ml.
Connection with MOD (thread): 510
Drip Type in bell: 810 (510 adapter included)
Regulation of Air inlet: Yes, Lateral
Regulation of Liquid inlet: No
Types of screws installed: Allen
Finishes tested model: Stainless Steel.
Available Finishes: See photo below

THE PRODUCT

The MATO RDTA is an RDTA atomizer developed from scratch by NEBELFEE & VANDY VAPE. (For those who do not know, I will tell you that NEBELFEE is a German reviewer).

The atomizer comes with an 810 drip, very comfortable and nice in my opinion. In case you don't like it you can put any 810 on it, or you also have a 510 adapter included in the pack.

The machining, adjustments and screws are good. The hood has two easily adjustable lateral air inlet slots to control the amount of airflow inlet, with stops on each side of the adjustment. The upper cover or better-said hood has 2 o-rings that ensure the tightness and totally eliminate the possibility of condensation, that is when you remove the hood to recharge it, it is inevitable that the hood gets a bit wet on the outside, apart from this it is an RDTA very very clean. Inside the hood is a little vaulted since there is not much space and does not allow more height.

In the Deck you can see the 2 air inlets with a honeycomb diffuser that distributes the flow laterally to the resistance, therefore, the air will hit the resistance from the lower half and rise up through the 2 sides of the resistance way to the fireplace. The assembly of the resistance and placement of the cotton is extremely simple and easy, simply cut the legs of the resistance with the help of the tool supplied to 7 mm and that's it.

The recharge is made from the side through a silicone membrane that acts as a valve, it can also be filled by changing the PIN and using a Mod with BF.

The Deck has 4 holes for the location of the metallic cables that will perform the function of raising the liquid and maintaining the drainage of the cotton, the system works very well with the 3mm cables and I have had no problems, those of 2.5 do not I have used them.

The underside can be unscrewed from the deck to clean it thoroughly, or the cables can be removed. But it should be noted that the tank is made of a plastic material that is not from PYREX, this prevents breakage due to blows, but we all know that this implies that plastic with certain flavors is sometimes not totally inert. A Pyrex replacement is missing.

MY PERSONAL CONCLUSIONS

The construction quality of this atomizer is very good and there is nothing IMPORTANT to highlight negatively, the machining, hardware and torics are excellent, but a Pyrex tank is emphasized. It can be used in BF mode which gives it a point in its favor.

In my opinion, the flavor goes very well and steam and blow too, easy setup, easy refill, easy maintenance, good regulation of air-flow and drainage without problems ... It is an atomizer that will delight those who like a good airflow and rather gross atos, MTL lovers abstain because you will not like it.

The very very balanced and complete atomizer in all its aspects. Without a doubt, a very good purchase option within the current RDTA's Single. I liked it a lot.

Positive points

- Good quality of materials and machining
- Option BF
- Good drainage
- Good air adjustment
- RDTA very clean and without leaks
- Very good flavor and steam
- Very easy and comfortable setup

Negative points to improve

- Plastic tank ... a Pyrex replacement would have been very good
- When recharging through the valve it is inevitable that when putting the hood on it gets a little wet.