Good morning dear vapers, today I want to talk to you about B'ADAPT PRO.
Inside the package we find:
1 x B'Adapt Pro box mod
2 x B'Adapt Pro sleeves
1 x Usb Type-C charging cable
1 x Instruction Manual (English and Indonesian language only)
The one in my possession is the one in the Dark Wood color
The B'Adapt pro is a sbs box made of steel and polycarbonate with dimensions of 80.5mm x 52mm x 28mm for a weight (without battery) of about 90 grams.
It is powered by a single battery of your choice between 20700, 21700 and 18650 (using a special adapter), it can deliver between 1W and 100W (with 0.1W steps) and is able to read resistances in a range between 0.1Ω and 3Ω.
Convenient and firmly in its seat, on one side of the box we find the fire button while in the front part the adjustment keys + and - are positioned above the screen.
Starting from the top we find the screw cap which, once unscrewed, will give us access to the battery compartment inside which, on the bottom, there is a + symbol (not perfectly visible) to indicate the correct direction of insertion of the cell.
From the videos on the net I assume that this tube is interchangeable with another black and perforated model which, however, I could not find on any store.
The cup is equipped with a self-adjusting floating pin and can accommodate atoms up to 25 mm in diameter although my advice is to consider 24 mm as the maximum limit since any protrusions on the rta could prevent them from screwing correctly.
As we can see from the image, the height between the cup and the top of the battery tube is 26 mm so I found particularly suitable atomizers not too high which could ruin the aesthetics of the combo.
Note the two recesses in the body which, thanks also to the magnets on the cup, will allow us to install aesthetic inserts in our box.
These inserts will transform the aesthetics of the B'Adapt giving it an even more captivating look but slightly limiting the diameter of the usable atomizers (in particular with the smaller insert we will not go beyond 22mm). I must also point out that the insertion and removal of these pieces are not really convenient and my advice is to always carry out the installation and removal operations with the atomizer disassembled in order to facilitate grip and avoid breaking.
At the bottom we finally see the Usb Type-C port through which we can recharge our cell. Personally I find this position extremely uncomfortable and also a point too subject to possible infiltration of liquid or dirt but, always advising against its use except for software updates, I have not considered it a big defect for some time.
With 5 clicks of the fire button we go to turn on / off the box. A clear and bright 0.96 "display will show us all the classic vaping information as well as providing us with the temperature of the box, a detail that I think can be very useful in case of use in temperature control.
With 3 clicks of the fire button we access the menu where we will have the following options available:
-Watt- classic VW delivery mode .
-Volt- delivery mode in which we are going to select the voltage as the primary setting value.
-Temp- temperature control mode ( SS / Ni / Ti / TCR)
In temperature control mode it will not be necessary to lock the resistance value and the circuit will ask us if the coil is new or not every time we insert a new atomizer, even in case of minimal changes in the read values.
Pressing the fire button twice will change the wattage.
-Bypass- delivery mode that simulates the behavior of a mechanical device while maintaining all the protections of a circuit.
In addition to these functions, we can also set:
-Lock / unlock keys- press the + and - keys at the same time (the fire key will remain active and we can continue to use the mod to vape)
- Complete lock / unlock - press the fire button and the + button at the same time (in this way we will completely lock the mod also disabling the fire button)
-Reset puff counter- press the fire button and the - button at the same time
Lastly, I remind you that this device is equipped with all the classic protections that will guarantee use in total safety even for the less experienced vaper.
Small, elegant and light ... this is the B'Adapt. Perhaps not very well made in some details but for my tastes, a real gem, so much so that I consider it the most beautiful product that has come into my hands in 2021.
Let's start with the coloring... I know that many do not appreciate the fake wood in the boxes, that feeling that recalls certain high end but which ends up being an "I want but I can't"... In my opinion, this finish gives it a real elegance and the possibility of being able to use aesthetic inserts give it that little bit more, which at first glance make you think of an object with a much higher price range.
During use you can feel its lightness given by the material used in 3D printing and hold in the hand it is comfortable and ergonomic even if to the touch it gives back a feeling a little "plasticky" and not exactly solid.
The key position on the side is for me the most comfortable one can have and in general, the circuit does its job very well, also giving us a good reading of the impedances. During my tests I never encountered any kind of problem, even obtaining good results in Tc, a modality that I rarely use and only on much more famous circuits.
Its strengths are the aesthetics and the price. Hippovape, as it had already done with Kudos, is once again able to present us with a valid product that will surely find the approval of SBS lovers, providing us with those extra components in the package that are usually sold separately and that it is always nice to find.
I point out that from some videos it seems that a further version of this box is also available equipped with a perforated black tube instead of the classic steel and including an aesthetic adapter to lift some atomizers from the cup.
I conclude by leaving you these images of combinations with different atomizers and I remain at your disposal for any questions or further comparison photos.
Learn more:
Hippovape B'adapt Pro SBS 100W Mod
